RME Audio Advanced Remote Control Betriebsanweisung PDF herunterladen (Seite 50)

User's Guide Fireface UCX © RME

24. Examples

24.1 8-Channel AD/DA Converter

TotalMix' super-flexible routing functions make it easy to turn the UCX into an 8-channel AD/DA

converter. The easiest way to do this is by loading the Setup Ad while the UCX is offline. Read

above how to do this. Still easy and giving many more options is to build the setup yourself. For

a clean start perform a Total Reset from the Options menu. Then select the ADAT Output 1/2 in

the third row, and pull up the faders of the Mic input 1/2 in the first row. Then select ADAT 3/4,

pull up Analog 3/4 and so on until all 8 analog inputs are routed to the corresponding 8 ADAT

channels. Now do the same for the analog outputs, route all ADAT inputs to these one after the

other. A monitoring of all or selected I/Os can be easily set up for the SPDIF output, or as ana-

log mixdown on one of the analog outputs.

24.2 2-Channel Mic Preamp

Use TotalMix to route the two microphone inputs directly to the analog outputs. This turns the

Fireface UCX into a 2-channel microphone preamp. The AD- and DA-conversion will cause a

small delay of the audio signal of around 0.086 ms (at 192 kHz, see chapter 37.2). But this is

nothing to worry about, as it is the same delay that would be caused by changing the micro-

phone's position by about 2.5 centimeter (1 inch).

24.3 Monitor Mixer

TotalMix allows ANY configuration of all I/Os of the Fireface. For example, set up the device as

monitor mixer for 8 analog signals, 8 digital via ADAT and 2 via SPDIF. Additionally, TotalMix

lets you set up ANY submixes, so all existing outputs can be used for different and independent

monitorings of the input signals. The perfect headphone monitor mixer!

24.4 Digital Format Converter

As TotalMix allows for any routing of the input signals, the Fireface UCX can be used as ADAT

to SPDIF/AES converter, ADAT to two SPDIF splitter, two SPDIF to ADAT converter, and

SPDIF coax to optical converter.

24.5 Analog / Digital Routing Matrix

The Matrix in TotalMix enables you to route and link all inputs and outputs completely freely. All

the above functionalities are even available simultaneously, can be mixed and combined in

many ways. Simply said: the Fireface UCX is a perfect analog/digital routing matrix!

24.6 External Interface for Apple’s iPad

and iPhone

In Class Compliant mode the UCX performs as analog and digital front-end for Apple’s iPad (all

versions), and since iOS 7 also for the iPhone. With this not only flexible high-grade inputs for

line and microphone are available for these devices, but also high-quality analog outputs. Se-

quencer or synthesizer apps can be played with normal keyboards via MIDI. The sounds gen-

erated within the mobile devices are directly PA compatible when played over the balanced line

outputs of the UCX. See chapter 29 for more details.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 111 112

Keine Kommentare

RME Audio Advanced Remote Control Betriebsanweisung Seite 50