RME Audio Advanced Remote Control Betriebsanweisung PDF herunterladen (Seite 99)

User's Guide Fireface UCX © RME

DA, Line Out 1-6, rear

• Resolution: 24 bit

• Dynamic range (DR): 111 dB, 113 dBA @ 44.1 kHz (unmuted)

• Frequency response @ 44.1 kHz, -0.1 dB: 8 Hz – 20.4 kHz

• Frequency response @ 96 kHz, -0.5 dB: 6 Hz – 45 kHz

• Frequency response @ 192 kHz, -1 dB: 5 Hz - 90 kHz

• THD: -100 dB, < 0.001 %

• THD+N: -96 dB, < 0.0015 %

• Channel separation: > 110 dB

• Maximum output level: +19 dBu

• Output: 6.3 mm TRS jack, servo-balanced

• Output impedance: 75 Ohm

• Output level switchable Hi Gain, +4 dBu, -10 dBV

• Output level at 0 dBFS @ Hi Gain: +19 dBu

• Output level at 0 dBFS @ +4 dBu: +13 dBu

• Output level at 0 dBFS @ -10 dBV: +2 dBV

DA – Phones, 7/8, front

• as DA, but:

• Output: 6.3 mm TRS jack, unbalanced

• Output impedance: 30 Ohm

36.2 MIDI

• 2 x MIDI I/O via 5-pin DIN jacks

• Galvanically isolated by optocoupled input

• Hi-speed mode: Jitter and response time typically below 1 ms

• Separate 128 byte FIFOs for input and output

36.3 Digital

• Clocks: Internal, SPDIF In, ADAT In, word clock in

• Low Jitter Design: < 1 ns in PLL mode, all inputs

• Internal clock: 800 ps Jitter, Random Spread Spectrum

• Jitter suppression of external clocks: > 30 dB (2.4 kHz)

• Effective clock jitter influence on AD and DA conversion: near zero

• PLL ensures zero dropout, even at more than 100 ns jitter

• Digital Bitclock PLL for trouble-free varispeed ADAT operation

• Supported sample rates: 28 kHz up to 200 kHz

36.4 Digital Inputs

Word Clock

• BNC, not terminated (10 kOhm) or internally terminated (75 Ohms)

• Automatic Double/Quad Speed detection and internal conversion to Single Speed

• SteadyClock guarantees super low jitter synchronization even in varispeed operation

• Not affected by DC-offsets within the network

• Signal Adaptation Circuit: signal refresh through auto-center and hysteresis

• Overvoltage protection

• Level range: 1.0 Vpp – 5.6 Vpp

• Lock Range: 27 kHz – 200 kHz

• Jitter when synced to input signal: < 1 ns

• Jitter suppression: > 30 dB (2.4 kHz)

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare

RME Audio Advanced Remote Control Betriebsanweisung Seite 99

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen RME Audio Advanced Remote Control