RME Audio Advanced Remote Control Betriebsanweisung PDF herunterladen (Seite 78)

User's Guide Fireface UCX © RME

Store current state into device. The unit can store up to 6 setups (the current state) in its own

memory. This function is especially useful when working in stand-alone mode.

Enable Stand-Alone MIDI. Not connected to a computer the Fireface UCX can still be con-

trolled directly by MIDI. See chapter 28.6.

26. The Matrix

26.1 Overview

The mixer window of TotalMix looks and operates similar to mixing desks, as it is based on a

conventional stereo design. The matrix display presents a different method of assigning and

routing channels, based on a single channel or monaural design. The matrix view of the Fire-

face UCX has the look and works like a conventional patchbay, adding functionality way beyond

comparable hardware and software solutions. While most patchbays will allow you to connect

inputs to outputs with just the original level (1:1, or 0 dB, as known from mechanical patchbays),

TotalMix allows you to use a freely definable gain value per crosspoint.

Matrix and TotalMix are different ways of displaying the same processes. Because of this both

views are always fully synchronized. Each change in one view is immediately reflected in the

other view as well.

26.2 Elements of the Matrix View

The visual design of the TotalMix Matrix is mainly determined by the architecture of the Fireface

UCX system:

¾ Horizontal labels. All hardware outputs

¾ Vertical labels. All hardware inputs. Below are

all playback channels.

¾ Green 0.0 dB field. Standard 1:1 routing

¾ Dark grey field with number. Shows the

current gain value as dB

¾ Blue field. This routing is muted

¾ Red field. Phase 180° (inverted)

¾ Dark grey field. No routing.

To maintain overview when the window size has been reduced, the labels are floating. They

won't leave the visible area when scrolling.

26.3 Operation

Using the Matrix is a breeze. It is very easy to indentify the current crosspoint, because the

outer labels light up in orange according to the mouse position.

¾ If input 1 is to be routed to output 1, use the mouse and click one time on crosspoint In 1 /

AN 1 with held down Ctrl key. Two green 0.0 dB field pop in, another click removes them.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 111 112

Keine Kommentare

RME Audio Advanced Remote Control Betriebsanweisung Seite 78